Blazer Front End Mock-Up

We took advantage of a few nice hours this afternoon to mock-up the grille on the Blazer. After pulling off the old front bumper with the impact strips, we installed the new smooth front bumper, followed by the new lower valance. We topped it off with the new grille, and the results are posted here. Everything is just hand tight now, as we had to make sure there were no clearance issues or gross misalignments. The only thing to mock up from here are the fender flairs (I hope that is it).
We also need to weld up the holes for the S-10 emblem on the fender and the antenna, then it is on to the sanding and body filler. It shouldn't take much, and I hope to get to that by next week.